Equus 3160 Innova ABS + Professional CanOBD2 Diagnostic Code Scanner for OBDII Vehicles with Back-lit Screen and Enhanced Live Data Review.
"Innova 3160" 2009-08-24
By David L. W. Thomas (USA)
I was tired of the cheap OBD readers and wanted something much better. I also wanted something I could read the ABS system with. The Innova 3160 does the trick. It is easy to use and understand. I like the way it prompts you in order to get what you are looking for. It has an excellent screen with the exact information you need to make repairs. It is obvious that they consulted with a repair tech when they designed it. I haven't tried to up-date it from the computer as yet, but it has all the necessary items and information with it to do so. On the down side, it doesn't have an explanation for all the manufacturer codes, especially the ABS codes. I found that I am going to their web site quite often to get the expanation. The web-site is very good and helpful though. I really like it. The worst thing is the CHEAP carrying case. The unit won't even fit into it with the cable attached. That means that you are always removing and replacing the cable. I'm sure that isn't good on the connection. Throw the case away and buy something better that you can keep the scanner, instruction book, and other materials in. It's hard to believe a company like this would offer such a fine instrument and provide it in this case. Never-the-less, it's a great scanner and well worth the money-just figure a little extra for another case!
"A must have tool / Innova 3160" 2009-08-20
By Cars
From the early 80's on I have had scan tools.
Older ones you had to count the check engine light flashes to get the code number (still have mine for ford / gm / chrysler). I even went as low as to use a paper clip to get the codes.
Then I started with my first OBDII and it was very good (had to look the code description up in a book)
Now with the CAN OBDII and error code description on screen it is a must have for anyone.
This model with the ABS is a nice little touch also.
Even if you don't repair the car yourself, knowing the code & description before going to a garage allows you to know what is wrong and if they are telling you the truth or not.
Leaving the gas cap off after a fill up and having the check engine light come on can cost over 70 bucks to get the car computer reset, only a few seconds to reset with this. (some newer cars / vans don't automatically reset like the older models cars did)
Best of all, after you repair your car being able to use the OBDII tester to verify the repair is nice.
A would say a must have for beginner / hobbiest / professional.
"Equus scan tool 3160" 2010-02-03
By Monroe C. Smith (Tucson Ariz)
I bought this tool to supplement an OTC scan tool I use in my business. It is so easy to use & much faster than my $3000.00 tool & actually has some features that the more expensive scan tool doesn't have.
I would not hesitate to recommend this tool for the do it your self person. Price is certainly right for all that this tool does
"Best Scanner yet" 2009-09-12
By Shawn A. Worth (Northern CA)
I replaced a 3100 model with this one. Not as easy to use as the 3100, but I like the live data and the abs code reading abillity. This scanner will read 2009 ford f450/6.4 diesel.
"well thought out tool" 2009-10-11
By David A. Jacob (orange park ,florida)
it took a week of going to different sites and reading customer reviews plus time at manufactors home sites there were plenty of negative reviews on many models but on this unit the worst complaint was wanting a larger case. like any tool it takes practice learning how to use all the info available ,The ABS circuit is a plus I own a small used car dealer ship but it has already paid for it self in pointing out driveability issues other brands had reliability issues or customer service issues but so far it is a winner. the hardest part is sometimes finding the defective parts location under the hood I go to my local parts store and they have made use of service manuals for free ( chilton )I like buying from Amazon because of there willingness to work with you if you do have a problem
By David L. W. Thomas (USA)
I was tired of the cheap OBD readers and wanted something much better. I also wanted something I could read the ABS system with. The Innova 3160 does the trick. It is easy to use and understand. I like the way it prompts you in order to get what you are looking for. It has an excellent screen with the exact information you need to make repairs. It is obvious that they consulted with a repair tech when they designed it. I haven't tried to up-date it from the computer as yet, but it has all the necessary items and information with it to do so. On the down side, it doesn't have an explanation for all the manufacturer codes, especially the ABS codes. I found that I am going to their web site quite often to get the expanation. The web-site is very good and helpful though. I really like it. The worst thing is the CHEAP carrying case. The unit won't even fit into it with the cable attached. That means that you are always removing and replacing the cable. I'm sure that isn't good on the connection. Throw the case away and buy something better that you can keep the scanner, instruction book, and other materials in. It's hard to believe a company like this would offer such a fine instrument and provide it in this case. Never-the-less, it's a great scanner and well worth the money-just figure a little extra for another case!
By Cars
From the early 80's on I have had scan tools.
Older ones you had to count the check engine light flashes to get the code number (still have mine for ford / gm / chrysler). I even went as low as to use a paper clip to get the codes.
Then I started with my first OBDII and it was very good (had to look the code description up in a book)
Now with the CAN OBDII and error code description on screen it is a must have for anyone.
This model with the ABS is a nice little touch also.
Even if you don't repair the car yourself, knowing the code & description before going to a garage allows you to know what is wrong and if they are telling you the truth or not.
Leaving the gas cap off after a fill up and having the check engine light come on can cost over 70 bucks to get the car computer reset, only a few seconds to reset with this. (some newer cars / vans don't automatically reset like the older models cars did)
Best of all, after you repair your car being able to use the OBDII tester to verify the repair is nice.
A would say a must have for beginner / hobbiest / professional.
By Monroe C. Smith (Tucson Ariz)
I bought this tool to supplement an OTC scan tool I use in my business. It is so easy to use & much faster than my $3000.00 tool & actually has some features that the more expensive scan tool doesn't have.
I would not hesitate to recommend this tool for the do it your self person. Price is certainly right for all that this tool does
By Shawn A. Worth (Northern CA)
I replaced a 3100 model with this one. Not as easy to use as the 3100, but I like the live data and the abs code reading abillity. This scanner will read 2009 ford f450/6.4 diesel.
By David A. Jacob (orange park ,florida)
it took a week of going to different sites and reading customer reviews plus time at manufactors home sites there were plenty of negative reviews on many models but on this unit the worst complaint was wanting a larger case. like any tool it takes practice learning how to use all the info available ,The ABS circuit is a plus I own a small used car dealer ship but it has already paid for it self in pointing out driveability issues other brands had reliability issues or customer service issues but so far it is a winner. the hardest part is sometimes finding the defective parts location under the hood I go to my local parts store and they have made use of service manuals for free ( chilton )I like buying from Amazon because of there willingness to work with you if you do have a problem
